Screws Backed Out on Every Line
Years of expansion work screws loose along each purlin, and every raised head is a leak. Oversized screws with new washers close them.
Greenup County Seat
As a Greenup commercial roofing contractor, we reroof downtown buildings, farm shops, and storage buildings, often with new metal panels on existing framing.

Shops And Farm Buildings

Steel buildings fill much of the schedule for a Greenup commercial roofing contractor. Greenup is the county seat, and buildings inside city limits start with the city office. The state contact sheet lists both a local and a state building inspector for the county.
Outside town, farm shops and storage buildings with new metal roofs raise their own questions, starting with how the county classifies the building. We note who answered and when, which helps if a question comes up later.
Roof Conditions
Steel buildings around Greenup wear in predictable places. These are the ones we check.
Years of expansion work screws loose along each purlin, and every raised head is a leak. Oversized screws with new washers close them.
Panels rust first at the eave, where water and debris sit longest. New panels go on once purlins check out.
Packed gutters freeze, pull away from the fascia, and dump water down the wall. Straps and right-sized gutters keep them on.
Flat-roofed additions on steel buildings pond and leak where they meet the pitched roof. Retrofit framing or new taper fixes them.
Condensation off bare steel drips onto stored equipment on cold mornings. A vapor retarder stops it.
Storm gusts bend ridge cap and rake trim, opening gaps that let blowing rain in. New trim and closures seal the gaps.
Benefits
A Greenup reroof that keeps sound framing and replaces what failed puts a dry roof over the building for less work.
Where purlins are solid, new steel goes right on the frame you already have. That saves rebuilding the whole frame.
Rusted purlins are found and repaired while the old panels are off. Fixing them now avoids a second job.
Gutters sized to the roof and downspouts aimed away from drives and lots. Downspouts empty away from the walls.
A vapor retarder or faced insulation cuts the winter drip over equipment. Stored equipment stays dry on cold mornings.
New ridge cap, rake trim, and closures hold panel ends tight against storm gusts and blowing rain. Panel ends stop rattling in storms.
Our Services
Greenup work runs from downtown commercial roofs to farm and storage buildings outside town.
R-panel or standing seam on shops, barns, and storage buildings. Gutters are sized to the roof.
Commercial Metal RoofingFasteners replaced one size up and laps resealed on roofs with life left. Washers are replaced with screws.
Commercial Roof RepairTear-off or retrofit framing on flat sections tied into pitched roofs. Ponding is ended with slope.
Flat RoofingWelded TPO on low-slope roofs in the city. Coping is reset at the edges.
TPO RoofingCall with the building size and what the panels look like. We check purlins before recommending new steel.
Process
The order keeps permit answers and framing repairs ahead of the panels.
We walk the panels and check purlins, trusses, and gutters from inside and out.
City buildings start with the city office; outside town, we ask how the county treats the building.
Rusted purlins and damaged trusses are repaired before any new panel goes on.
Insulation or a vapor retarder goes on first, then new panels with fresh screws, closures, ridge cap, and rake trim.
Panels, trim, and gutters go on, and a log records who answered each permit question and when.
Commercial Roofing
We take commercial roofing work in Greenup and the towns below, eleven places in all. Outside them? Call us or send us a message.
Greenup
County seat shops, barns, and storage buildings.
Questions
More answers are on the commercial roofing FAQ.
Permits
Inside city limits, start with the Greenup city office. The state sheet lists a local and a state building inspector for the county.
For farm buildings outside town, ask how the county classifies the use, and write down who answered and the date.
Purlins
They get repaired or replaced before new panels go on. That turns part of the job into structural work, which we flag before it starts.
Gutters
They should. Gutters sized for the roof area and downspouts pointed away from drives and lots keep water off the walls and foundation.
Drip
Warm, damp air inside condenses on cold bare steel. Faced insulation or a taped vapor retarder on the warm side stops it.
Additions
Often, with retrofit framing that builds slope over the flat section. An engineer checks the structure first, and gutters replace any interior drain.
Panels
Most farm shops and storage buildings take 26 gauge R-panel over Galvalume steel, screwed through the face into the purlins.
Standing seam with concealed clips costs more and suits buildings where long panel runs or a cleaner look matter. Either one needs sound purlins underneath.
Storms
Walk the roof or look from a lift for bent ridge cap, loose rake trim, raised screw heads, and limbs lying on panels.
Clear gutters and downspout outlets too. Write down what you find, and call if trim moved or screws are missing.
Send the building type and roof size. We check the frame before talking about panels.